 |
|
 |
Begin OCR Text:
_
5. Press out the bearing sle'eves (3 and 1 2) and
'
the bushes (2 and 1 O).
6. Clean the parts and replace those that are _
Worn.
7. Press in the new bushes and lubriCate them
with universal grease. fit the bearing sleeves.
8. Fit the double lever (1 7) and thrust link (1 5) in
position in the vehicle. fit the bolts (1 and 5)
and nuts.
9. Place the pedal with return spring in position
and fit the bolt (9) and nut. Hook on the return
spring and fit the split pin bolt (14).
1 O. Fit the brake light switch and adjust its loca-
tion if necessary, see under '' Adjusting the
brake light switch''. Fig. __. B_e_e pedaI auapenaion
1 . Bolt 1O. Bush
2. Bush Il . Spring
3. Bearlng sleeve 12. Bearing sleeve
4. Split pin bolt 13. Brake light switch
5. Bolt l4. Split pin bolt
' 6. yoke l5. Thrust link
7. Th_ugt rod t6. Brake ped8l
g. _ock_u_ l7. DoubIE leuer
9. Bolt
f.28
|
