 |
|
 |
Begin OCR Text:
_
___
P 18OO
_ _,
_ '_
VOlVO
Z3sZ6
Fig. 26. Fit_ing rearcover. M 4O . _
Fig. 27. Fitting rear cover. M 41 Vz'_'___o
1. Sleeve
4b. GearboK with ouerdrive (M 41) .
Place the rear couer and ball bearing on a
are different thicknesses of Iock_nß fing SO support ring or sleeve as shown in Fig. 27.
select one which completelyfills the locking p_ace on the thrust washer. the 1st speed
ring grooue. gear wheel and synchronizing cone. Select
_ 2. GearboK without overdrive.
Place the speedometer gear on the bearing
' in the rear cover. Press in the sealing ring
with drift SVO 2413, see Fig. 24.
_ 3. Fit the parts for 1st speed and 2nd speed
synchronizer on the main shaft. Fit the
spring rings correctIy, see Fig. 25.
4a. GearboK without ouerdrìve.
Fit the synchronizing cone, 1st speed Qear
whee_ and thrust washer. Place the rear
cover on the shaft. Ensure that the speedo-
meter gear is positioned correctly. Place
on the yoke. Use a sleeue which fits into
the recess in the yoke, press on the couer
and yoke, see Fig. 26. Place on the washer
and nut for the yoke. Use tooI SVO 24O9
as a counterhold for the yoke and tighten '4__i_t_'iO
the nut. Fig. 28. Trying ou_ Iocking ring 4-7
|
